Decoding Vinyl Fence Pricing: A Buyer’s Guide

Vinyl Fence prices can feel like alphabet soup. Styles. Heights. Posts. Gates. Numbers swim around, and it’s hard to tell what’s a real cost driver and what’s just fluff. If you’re a Savannah homeowner trying to budget smart, you’re in the right spot. This guide breaks down what you’ll actually pay for a vinyl fence here in Coastal Georgia, why prices vary, and how to get a fence that looks great, holds up in our heat and humidity, and doesn’t blow the budget. You know what? It really doesn’t have to be complicated.

What actually sets the price of a vinyl fence?

Let me explain. Most vinyl fence cost comes down to three pillars: materials, labor, and the details. Those details matter more than folks think. Here’s the short version, with plain talk and a few pro terms mixed in.

Materials. Thicker vinyl, reinforced rails, color or woodgrain textures, and routed posts (versus bracketed) all push the number. Privacy panels cost more than picket. Taller costs more than shorter. Simple.

Linear footage. More fence, more money. If you’re wrapping a corner lot or fencing the whole backyard, the footage adds up fast.

Gates. A single 4-foot walk gate is one thing. A 12-foot double drive gate with upgraded hinges is another. Hardware quality matters, especially near the coast.

Posts and footings. Concrete, depth, and spacing affect price and performance. In our sandy-clay soils, we set deep and true. It helps with wind and shifting ground.

Site conditions. Roots, stumps, old fence removal, slopes, sprinkler lines, tight access—these change labor time. They’re not glamorous, but they move the needle.

Permits and HOA. City of Savannah and nearby municipalities may require permits depending on height and location—pool fences especially. HOAs often specify height, color, and style. That can influence your final configuration and price.

Labor. Skilled crews, clean lines, and proper concrete cures don’t happen by accident. Good workmanship prevents sagging rails and wobbly posts later—which is cheaper in the long run.

Material quality: the not-so-hidden factor

Not all vinyl is equal. Coastal sun and salt air are tough on plastics. Look for ASTM F964–compliant vinyl, UV inhibitors, and thicker wall sections. Virgin PVC (not recycled filler) often holds color better and resists chalking. That said, some modern blends that use recycled content in the core are solid too—ask for specs and a manufacturer’s warranty you can actually read.

Routed posts (holes cut to accept panel rails) tend to be stronger and cleaner than surface brackets. They also look more seamless. Aluminum-reinforced bottom rails help with sag prevention, especially on 6-foot privacy panels.

One more thing: warranties. A “lifetime warranty” sounds perfect—until you read the exclusions. We’ll walk you through what’s covered and what’s not, from color fade to impact cracks. Honestly, clarity beats hype every time.

Style and height: privacy, semi-privacy, or picket?

Different styles do different jobs. Privacy panels block the view and the breeze. Semi-privacy filters both. Picket keeps pets in and sightlines open. Your choice changes the Savannah vinyl fence pricing quite a bit.

These ranges assume standard posts, routed panels, concrete footings, and normal site conditions. Fancy accents—lattice, scalloped tops, decorative post caps, extra-thick rails—add cost. Are they worth it? If it’s your forever home and you want a “wow” line along the back patio, we’d say yes. If it’s a rental near Daffin Park, maybe keep it clean and simple.

Gates: small rectangle, big effect

Gates look small on paper but hold a lot of hardware and load. That’s why they carry a separate line item. They’re also where cheap parts show their true colors after one hot summer.

Walk gates (3–4 ft). Add roughly $275–$600 each installed, depending on hinge and latch quality. Upgrading to a stainless latch is smart within a few miles of the marsh.

Double gates (8–12 ft). Expect $850–$1,800+ with center drops, stronger posts, and beefier hardware. If you’ve got a trailer or mower to swing through, a well-built double gate is the move.

Drive gates and automation. Want remote openers? The mechanism and power run push the price higher. It’s slick, though, and we can integrate with keypad or phone control. We’ll be straight with you on what’s necessary and what’s nice-to-have.

Labor and site conditions in Savannah

Our ground varies. Some yards have sandy patches that drain fast; others hold water after a storm. Live oak roots twist around everything. These little local quirks affect both the time and the technique.

Soil and set depth. Deeper posts with fully packed concrete help resist wind and movement. In low spots, we’ll over-dig and add gravel for drainage before the pour. Small detail, big payoff.

Old fence removal. Hauling away Chain Link, wood, or a half-buried post line takes crew time and disposal fees. We’ll measure, count posts, and be upfront.

Access. Narrow sides of homes, limited parking, or a long haul from the street to the backyard can add labor. It’s not dramatic, but it’s real.

Weather windows. Concrete doesn’t love heavy rain. Our crews plan around Savannah showers and summer heat. That scheduling helps the set cure clean.

Permits, HOA rules, and property lines

Here’s the thing: the cheapest mistake in fencing is a phone call. Call 811 before we dig. Utility locates matter.

Inside Savannah city limits and nearby towns, height and placement rules can apply—especially in front yards, corner lots, or near intersections. Pool fences have strict codes for height, clearance, and latch heights. If you’re in an HOA, check their guidelines on height, style, and color. White is often encouraged; woodgrain or tan may need approval.

Not sure where the property line is? A survey can save headaches. Fence on your side, with posts and footings fully within your property, and you’re set. We’ll help you sift paperwork and figure out what’s actually required versus what’s just recommended.

Real-world cost examples

Numbers calm the nerves. Here are three common setups we build around Savannah, with honest ranges. Your exact price shifts with layout, gates, and soil.

• Small backyard, 100 linear feet, 6 ft privacy, one 4 ft gate: $4,200–$6,000 installed. Clean, simple, quick to build.
• Average yard, 160 linear feet, 6 ft privacy, two gates (4 ft and 10 ft double): $7,200–$11,000 installed. Adds driveway access and better flow.
• Corner lot, 220 linear feet, mixed heights (4 ft picket front, 6 ft privacy back), two gates: $9,500–$14,500 installed. A polished look for curb appeal and backyard privacy.

Could you land lower with basic materials or fewer gates? Sure. Could the number rise with fancy caps, lattice, or woodgrain? Also yes. We’ll map it both ways and let you choose where the dollars go.

Vinyl vs. wood vs. aluminum vs. chain link

We install all four. Each has a place. In Savannah’s sun and salt air, vinyl and aluminum tend to win on maintenance. Wood is warm, classic, and more hands-on. Chain link is a budget workhorse; privacy slats help but push the number closer to vinyl.

For long-term costs, vinyl usually makes sense if you want privacy without painting or staining. And because vinyl doesn’t swell or splinter, it stays friendlier around pool decks and tight side yards.

Hidden costs you can avoid

A few budget traps pop up again and again. They’re easy to sidestep when you know them.

• Light posts with shallow footings. They’re cheaper now, wobbly later. Strong posts with proper depth and concrete save headaches.
• Bracketed panels on tall privacy runs. Fine for small sections, but long runs do better with routed posts for strength and a cleaner look.
• Skipping reinforced bottom rails. Sagging happens slowly. Reinforcement prevents it—especially in 6-foot privacy sections.
• Cheap latches and hinges. Coastal air tells on weak hardware. Stainless or powder-coated parts live longer and look better.

One mild contradiction you’ll hear from us: bigger posts aren’t always “better.” On short picket sections, oversized posts can look clunky. We balance structure with aesthetics, so the fence looks tailored—not bulky.

How to save money without cutting corners

There’s a smart way to trim costs and still get a fence that lasts.

• Keep the layout simple. Fewer corners and angles reduce labor and scrap. Straight lines look sharp and cost less.
• Choose classic white. Color and woodgrain are beautiful, but they add real dollars. White vinyl is timeless and budget-friendly.
• Plan gate count carefully. One main walk gate and one larger access gate is plenty for most yards.
• Clear the fence line ahead of time. If you’re able to remove light brush or an old dog-eared panel, you’ll cut labor hours.
• Bundle projects. Neighbors fencing shared lines at the same time can lower everyone’s per-foot cost.

And here’s a seasonal note: early spring and late fall are less hectic than peak summer. Scheduling then can mean faster timelines and more wiggle room for custom touches.

Questions to ask any fence contractor

These aren’t trick questions. They’re the ones that separate a smooth project from a risky one.

• What vinyl spec are you using? Ask about ASTM F964, UV inhibitors, and wall thickness.
• How are posts set? Depth, concrete type, and any reinforcement or gravel base.
• Are rails reinforced? Especially bottom rails on 6-foot privacy sections.
• What’s included? Permits, haul-away, utility locates, caps, and hardware.
• What’s the warranty—materials and labor? Get it in writing, clear and simple.
• What’s the real timeline? From contract to final walk-through, with weather caveats.

One more gentle suggestion: see a sample panel or a past project in person. Photos help, but your eye will catch rail stiffness, gate swing, and overall finish better in real life.

Why homeowners choose Savannah Gate & Fence

We build fences that feel right for Savannah—sturdy, clean, and easy to live with. Our crews handle the messy details: line layout, post depth for our soil, clean corners, and true gate frames. We’re local, we answer the phone, and we explain pricing in plain language. No fog, no “gotchas.”

What you can expect from us:

• Clear estimates. Line-by-line, so you see where every dollar goes.
• Quality materials. Routable posts, proven vinyl, and hardware that resists coastal wear.
• Respect for your yard. We protect grass, clean up daily, and finish with a careful walk-through.

We’ve installed fences across Ardsley Park, midtown, Pooler, and out toward Wilmington Island. Each neighborhood has its own quirks—oak roots here, HOA rules there—and we’ve learned how to build around them gracefully.

What a quote visit looks like

It’s simple. We measure, sketch the layout, talk through style and gates, check for visible utilities, and spot any tricky dig areas. If you’ve got a survey, we’ll review it. If you have HOA guidelines, we’ll confirm style and height. You’ll get a written estimate with options: good, better, and best. You pick the path that fits your budget and your home.

Before we start, we’ll schedule utility locates, pull any required permits, and lock in a target date. Weather can nudge the calendar a bit. Concrete and heavy rain don’t play well together—so we plan smart and keep you posted.

Ready to price your fence the right way?

If you want straightforward numbers and a fence that looks sharp for years, we’d love to help. Call Savannah Gate & Fence at 912-800-0818 and talk with a real person today. Or tap the button below to Request a Free Quote. We’ll bring samples, share honest advice, and build something you’ll be proud to call yours.